Curtains come in different sizes according to their length. But sizes are unfamiliar to most buyers yet the curtain should be shorter than the overall ceiling height. So, how can you hang curtains in a 10-foot ceiling? We’ve done the math for you.
The length of a curtain panel with a 10-foot ceiling is 108 inches. When you prefer puddled curtains, it should be approximately 120 inches. To hang the curtains for a high ceiling, it would be best to position the curtain rod either between 12 to 24 inches above the window frame or directly beneath the ceiling molding.
Whether or not the curtains should touch the floor, well it’s up to you. Read on for more details.
How to determine curtain size?
Curtains create an attraction in your room. It can be simple or elegant depending on your preference. Before you hang curtains, it is vital to know how to measure the size to achieve that beautiful look and stylish outcome.
Accuracy
You need to be able to accurately measure curtains prior to hanging. So, it is important that you have your steel tape measure because the fabric upholstery type tape measure could result in an incorrect measurement.
Consider the curtain length
Generally, curtains should hang from the rod to fall just on the floor for the best effect. Those floor-length curtains are best for living rooms, while those that puddle on the floor complement formal dining areas. If you want curtains that puddle on the floor, you can add 1-inch up to 12 inches for a more luxurious look.
Curtain rod position
In general, curtain rods should hang higher and wider than your window. In this way, the window will look bigger and allow light to pass through the room. Once you open the curtain, the room will look brighter too.
You can hang curtains using a rod or you might not. If you hang them with a rod, it should be installed 8 to 10 inches above your window.
The rod can also extend up to 12 inches on both sides of the window. If you have a high ceiling, you can place the rod 12 to 24 inches above the window or you can fix it below the molding.
Measure the length and the width of the curtain
Choose the right pole size
If you already have your curtain rod in place, well it’s great! If you need one, then you have to measure first the width of your window.
After that, add approximately 12 inches to this measurement. This will be the rod’s width to make sure the window is covered on both sides comfortably. Fix this at about 6 inches above the top of the window.
Do not forget to check cables and other wires before you fit them into the wall.
Measure your curtains
First, you need to calculate the width. You must measure the full width of the curtain rod, not the window itself. If you have pencil pleat curtains or tab top, double its width to make way for the curtains to gather on top. Then add about 1 inch to 2 inches of width measurements so the curtain won’t overlap in the middle.
Second, measure the length and decide where you want the curtain to fall. Remember to measure the length of the curtain several times to allow for any unlevel flooring.
Make sure to use proper measurement tools.
How do you hang the curtain on a 10-foot ceiling?
No matter how high your ceiling is, curtain installation is still the same. Hang curtains so that they will reach the floor. It is up to you if you will take or give an inch to the floor. Basically, it is one foot from the ceiling and about 6 inches above your window frame. There are three ways to hang your curtain if you have a 10ft ceiling.
1. Floating – the curtain is one-inch above the floor
This beige curtain is available on Amazon. Check it out.
2. Grazing – the curtain ends exactly at the floor level
3. Breaking – the curtain leaves one inch of the excess floor material
Should your curtains touch the floor?
There should be a lot of decision-making to do. But the most important factor is how you hang your curtain. Though the style and the fabric should be chosen to coordinate with your design, the way you hang it in your window ultimately produces the final look. You should determine how they fit in a room.
Curtains and drapes look best when they reach the floor. However, just how low the curtains should hang depends on the look you want. Sometimes you even want to pool it on the floor.
Here are some factors that you need to consider:
Lightly brush it to the floor
Curtains brushing the floor lightly create a trendy and chic look. Make sure that you have an accurate measurement to achieve an elegant look.
Hover an inch above the floor
Hovering an inch slightly above the floor is another factor to consider. It makes the opening and closing of curtains easy. This is also a great option for every window that is often used.
Short curtain
Short curtains and drapes are not ideal and you don’t want them to hang one inch above the ground. Curtains that are too short look outdated, but sometimes it makes the ceiling look lower.
If you have a low curtain rod, it will shrink the size of the window. You do not want to do this, do you? The rule of the thumb here is that you can go four inches above the window or you can go all the way up from there.
In Conclusion
Ready-made curtains come in different sizes based on your ceiling height. As we all know hanging a curtain is easy. You don’t have to complicate things. Just make sure you know the right measurement of your window and determine the style of the room you want to achieve. Choose the right curtain so it won’t look awkward.
Check this post for your window treatment.